Precautions for the preservation of the hydraulic breaker

Time:

2024-07-24

1.If it is the rainy season, try to avoid the hydraulic breaker lying flat in the open air, because the front head is not sealed and will enter rain. The piston is pushed by nitrogen to the front end of the back head block. If it is used again immediately, it is OK. If it is used the next day, the piston will rust after water, causing damage to the oil seal and piston.

2.In the rainy season, when the hydraulic breaker is not used temporarily, the sleeper cushion should be placed at the back of the crushing to prevent rain from pouring down the chisel into the cylinder and blistering the piston.

3. If the hydraulic breaker is not used for a period of time, please keep it as follows.

a. Hoses and hard pipes must be installed with plugs.

b. Remove the chisel .

c. Align the rod with the piston's hitting surface and knock the piston into the back head .

d. Add more grease to the front part of the front head .

4.In order to protect the hydraulic breaker, please try to place it in a place that is not invaded by rain, the back head is slightly higher than the front head , and cover with a protective film. Improper storage will cause the exposed piston to rust, and oil will leak down the chisel when used again.

Piston rust physical picture

Precautions of the hydraulic breaker

Related news

07-24

Precautions for the preservation of the hydraulic breaker

Precautions for the preservation of the hydraulic breaker when rain season

04-29

Introduction to Excavator Hydraulic Breaker

Hydraulic breakers are referred to as "breakers" or "breakers". The power source of hydraulic breakers is the pressure provided by excavators, loaders or pump stations. work efficiency. The principle of choosing a hydraulic breaker is to choose the most suitable hydraulic breaker according to the model of the excavator and the operating environment. According to the analysis of Li Gong, a senior consultant of Hydraulic Talent Network, my country's hydraulic breaker is mainly imported from abroad. Well, Li Gong from Hydraulic Talent Network reminds everyone not to forget to support domestic technology so as to have better development.

WeChat public account

Mobile official website

Tel: +86-535-3805029 +86-535-3805039

+86-535-3805032

E-mail: s ales2@ytxinren.com sale2@sdbtlzg.cn

Add: No. 99-2, Haicheng Street, Rushankou Industrial Park, Weihai City, Shandong Province

BTLB SHANDONG PRECISION MACHINERY CO.LTD. Lu ICP No.2021009130 Powered by 300.cn SEO